Fixing MMU
This section describes the procedures to fix the MMU by different methods.
Fixing Unit Bracket
These instructions for mounting a unit bracket to the MMU apply to all installation
types.
To fix the unit bracket, do the following:
Prerequisites
Before proceeding with fixing the unit bracket, make sure that you have the items
mentioned in the table below:
Table 2.
Parts and Tools for Fixing Unit Bracket on MMU
Category
Parts
Recommended Torque Value
Working Tools
1
Figure 8.
Fixing Unit Bracket (1)
Unit Bracket
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Description
Unit Bracket
Fasteners
M6 × L20 hexagonal bolt (Washer
assembly)
M6 Hex. Bolt
Torque Wrench (10 to 50 lbfin)
Torque Wrench Spanner Head (apply hexagonal head: 10 mm)
Spanner (apply hexagonal head: 10 mm)
Check the position for mounting the unit bracket on the back of the MMU and
place it in that position.
MMU Rear Side
Chapter 2 Installing System
2 EA
8 EA
43 lbfin
1
2
Confidential
Unit Bracket
16