Test; Download "Ubi.ko; Load Ubi Module - Samsung S3C6410 Installation Manual

Hide thumbs Also See for S3C6410:

Table of Contents

S3C6410 INSTALLATION MANUAL UBI(UNSORTED BLOCK IMAGES) V1.0

3 Test

In this Chapter, you will understand how to test UBI in you system.

First, you have to download "ubi.ko" device module file that is created by make command. You can

this device module in "linux/drivers/mtd/ubi/ubi.ko".

Next, Insert UBI Module(ubi.ko) which is download from your host with insmod command. Input

command as following.

[root@Samsung tmp]# insmod ubi.ko mtd=3

In this command, "mtd=3" is a MTD partition what you want to create UBI Volume. If you want to

create UBI volume in another MTD partition, input number of partition. If you success insert UBI

module(ubi.ko), you can see ubi information.

Preliminary product information describe products that are in development,

for which full characterization data and associated errata are not yet available.

Specifications and information herein are subject to change without notice.

Table of Contents