Figure 29.
Marking_Wall Mount Bracket-Top Assembly
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
Drilling & Anchoring
To drill an anchor hole, do the following:
Prerequisites
Before proceeding with the drilling & anchoring process, make sure that you have
items mentioned in the following table
Table 8.
Parts and Tools for Drilling & Anchoring
Category
Parts
Working Tools
Table 9.
Anchor Bolt Drill Bits and Hole Depth
Category
Wall Type
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Drill Template
Description
M12 Set Anchor Assembly
Hammer Drill
Concrete Drill Bit [0.7 in. (17 mm)]
Vacuum Cleaner
Hammer
Anchor Punch (for M12 Set Anchor)
Anchor Bolt
M12
Chapter 2 Installing System
Unit: in (mm).
+ : Marking Point
9.8 (250)
Drill Bits
0.7 in. (17 mm)
Confidential
4 EA
Hole Depth
2.2 in. (55 mm)
34