Figure 77.
Connecting Power Cable (3)
[MMU Rear]
When the connector is fastened tight, the white line on the system side connector
becomes invisible.
[White Line is invisible]
The method for connecting or disconnecting the power connector is as follows:
- For connecting the connector, push the shell to upper side.
- For disconnecting the connector, pull the coupling nut to lower side.
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
1
System side connector's
white dot
Cable side connector's
white dot
Power Cable Assembly
[White Line is visible]
Confidential
Chapter 3 Connecting Cables
2
Push
Shell
86