Installation Tools; Table 1. Basic Installation Tools - Samsung MT3204 Series Installation Manual

Installation Tools

The basic tools required for installation are listed in the table below. The
additional tools required for each site need to be identified and arranged during a
site survey before starting the installation.
Table 1. Basic Installation Tools
No. Name
1 Torque Driver
2 Screw Driver Bit
3 Screw Driver
4 Torque Wrench
5 Torque Wrench Spanner
Head
6 Spanner
7 Tape Measure
8 Level
9 Power Extension Cable
10 Hammer Drill
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Specification
Apply a torque range: 20 to 90
lbf·in
'+', No. 3
'+', No. 3
Apply a torque range: 10 to 50
lbf·in
Apply a torque range: 100 to 400
lbf·in
Apply hexagonal bolt head: 10
mm (for 10 to 50 lbf·in)
Apply hexagonal bolt head: 17
mm (for 100 to 400 lbf·in)
Apply hexagonal bolt head: 19
mm (for 100 to 400 lbf·in)
10 mm
17 mm
19 mm
16 ft./150 ft.
Normal
100 ft.
Normal
Confidential
Chapter 1 Before Installation
Purpose of use
Fastening M6 SEMS
Fastening M6 SEMS
Fastening M6 SEMS
Tightening M6 hexagonal. bolt
Tightening M10, M12 hexagonal.
bolt
Tightening M6 hexagonal bolt
Tightening M10 hexagonal nut
Tightening M12 hexagonal nut
Tightening M6 hexagonal. bolt
Tightening M10 hexagonal. bolt
Tightening M12 hexagonal. bolt
Measuring length
Levelling horizontality and verticality
Basic tool
Wall Type Drilling
7