Table 24. Parts And Tools For Connecting Cpri Cable - Samsung MT3204 Series Installation Manual

[Raised: Lock]
Connecting CPRI Cable
To connect a CPRI cable, do the following:
Prerequisites
Before proceeding with connecting the CPRI cable, make sure that you have the
items mentioned in the table below:
Table 24. Parts and Tools for connecting CPRI Cable
Category
Installation Section
Cable
Bend Radius
Connector
Working Tools
In the system, the laser beam light runs through the optical cable.
The exposure of the laser beam on worker's eye may cause serious injury so that it
should be handled with care.
Remove the cap of the optical connector before connecting.
- Before connecting the optical cable, check if the ferrule of the connector is
soiled. Be careful to keep the cutting section away from dust or foreign material.
If the cable is soiled with foreign material, do not blow to remove them.
- Make sure to clean the connector in accordance with the cleaning directions in
Annex.
- Do not touch the ferrule at the end of optical cable because it is easy to be
damaged.
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
System
Rear Side
Optical Module Bail
Description
CDU to MMU L0 Port
CPRI Cable (Optical, Single Mode, for Outdoor Type)
10 × OD
MMU
Optical Connector Cleaner
System
Rear Side
[Lowered: Unlock]
JONHON, Push Pull Type, PDLC03T03 (DLC/UPC)
Confidential
Chapter 3 Connecting Cables
90