Connecting Cpri Cable (1); Connecting Cpri Cable (2) - Samsung MT3204 Series Installation Manual

[Before Removing Cap]
To migration to 64T64R, an optical cable 6 pair must be prepared.
Before connecting the CPRI cable connector, the ferrule of the connecter of cable
side should be cleaned first by using the optical connector cleaner. (Appendix B
for more information.)
1
Figure 82.

Connecting CPRI Cable (1)

[MMU Bottom View]
2
Figure 83.

Connecting CPRI Cable (2)

The method for connecting/disconnecting the cap (push-pull type) is as follows:
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Install the CPRI cable from the CDU to the MMU L0 port.
Separate the cap from the system side connector (L0 port).
1
Cap (L0 Port)
Chapter 3 Connecting Cables
Cap
[After Removing Cap]
CPRI Cable
2
Confidential
Ferrule
CDU
91