Figure 27.
Fixing MMU on the Pole (3)
Do not take the fasteners out completely.
4
For detailed instructions of how to use the RF alignment tool, refer to the user
manual per each manufacturer.
Fixing Wall Type
This section describes the procedures for fixing the system on the wall.
Marking
To marking, do the following:
Prerequisites
Before proceeding with the marking, make sure that you have items mentioned in
the following table
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
1
M4 Plate Fixing Screw
M4 Plate Fixing Screw
By using the RF alignment tool, check the tilt and the azimuth and adjust when
there is an issue.
Chapter 2 Installing System
2
M4 Plate Fixing Screw
3
Confidential
Plate
31