Figure 31.
Drilling & Anchor (2)
Anchor Bolt Hole
Fixing Mount Bracket-Top Assembly on the Wall
To fix the mount bracket-top assembly on the wall, do the following:
Prerequisites
Before proceeding with fixing the mount bracket-top assembly on the wall, ensure
that you have the items mentioned in the table below:
Table 10.
Parts and Tools for Fixing Mount Bracket-Top Assembly
Category
Parts
Recommended Torque Value
Working Tools
1
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
M12 Hex. Nut
Description
Wall Mount Bracket Assembly-Top Assembly
M12 hexagonal Nut
Torque Wrench (100 to 400 lbfin)
Torque Wrench Spanner Head (apply hexagonal head: 19 mm)
Spanner (19 mm)
Hang the mounting bracket-top assembly fixing hole of MMU rear on the
anchor bolt fixed to the wall.
M12 Spring Washer
M12 Plain Washer
Confidential
Chapter 2 Installing System
Post-Tightening
Condition
372 lbfin
36