Table 25. Parts And Tools For Connecting Uda Cable - Samsung MT3204 Series Installation Manual

The method for connecting/disconnecting the CPRI (optical) connector is as
follows:
- For connecting the connector, push the shell to upper side.
- For disconnecting the connector, pull the coupling nut to lower side.
Shell
Connecting UDA Cable
To connect a UDA cable, do the following:
Prerequisites
Before proceeding with connecting the UDA cable, make sure that you have the
items mentioned in the table below:
Table 25. Parts and Tools for Connecting UDA Cable
Category
Installation Section
Cable
Minimum Cable bend Radius
Connector
MT3204 Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
[White Line is invisible]
Push
Description
MMU UDA Port to External alarm device
UDA Cable Assembly (Cat.5e 24AWG 4P)
Operation: 5 × OD
External alarm device
MMU
[White Line is visible]
Coupling Nut
Installation: 10 × OD
Check specifications of external device output
terminal per site and prepare fasteners.
JONHON, Push Pull Type, RJ45MF-CT-07
Confidential
Chapter 3 Connecting Cables
White Line
Pull
94