Table of Contents
Advertisement
Displays on the display panel of the SL Handheld
DW
►
1
Name of the radio link
•
Can be entered in the Device Identification menu of the receiver
(see „Using the operating menu of the receiver").
2
7-step display of the accupack or battery capacity
•
Graphically displays the current charge status of the accupack or the
batteries.
•
If you use the accupack, the remaining operating time is displayed in
hours.
3
RF output power of the transmitter
•
Displays the RF output power of the handheld transmitter.
4
6-step display for the RF signal level
•
Displays the current level of the RF signal
Starting up and using the handheld transmitter
Removing/inserting the accupack or the optional battery pack
You can power the handheld transmitter either with the supplied BA 10 ac-
cupack or with the optional B 10 battery compartment. The accupack must
be charged before the first use. The accupack can either be charged with
the optional CHG 2 or CHG 4N chargers (see „The CHG 2 charger" or „The
CHG 4N charger") or with the supplied USB cable.
To remove the accupack or the battery compartment:
▷
Simultaneously press the two catches and pull the accupack or the bat-
tery compartment away from the handheld transmitter.
►
The SL Handheld DW
97
Advertisement
Table of Contents
