Sennheiser SpeechLine Digital Wireless Series System Documentation page 41

Combining up to 4 links using the AWM 2 and the SL PASC 4
The following illustration shows an example of how to combine up to 4 links
with one AWM 2 antenna wall mount. This reduces the number of antenna
cables required from 8 to 2.
►
AWM 2
SL PASC 4
SL RACK RECEIVER DW ANTENNA I SL RACK RECEIVER DW ANTENNA II
1 2 3 4
1 2
ANT I
SL Rack Receiver DW
▷ Please observe the information below on the length of the extension ca-
bles („Signal loss due to extension cables and antenna splitters").
Always combine all antenna sockets ANT I of all receivers and all
antenna sockets ANT II of all receivers respectively to one of the
two antennas of the AWM 2. If you are using only 3 of the 4 connec-
tions on the antenna splitter, you should close the unused connection with
a terminating resistor (50 Ω) to minimize interfering signals and maximize
transmission power.
Recommendations on antenna mounting
Use the following Sennheiser cables
for connecting the AWM 2 to the SL
PASC 4:
CL 5 (5 m / 16.4 ft)
art. no. 505976
CL 10 (10 m / 32.8 ft)
art. no. 506263
3 4
ANT II
Cables for connecting the SL PASC 4 to
the SL Rack Receiver DW are supplied
with the SL PASC 4.
40