Performing a walk test (reception quali-
ty)
The Walk Test menu item allows you to check the reception quality of your
radio links within the operating environment. By performing a walk test,
you can verify the range and coverage of the radio link.
Return to first page of the instruction manual
Performing a walk test with the SL MCR DW in the Control Cockpit
To perform a walk test in the Control Cockpit:
▷
Switch on the transmitter and the receiver of the radio link you want to
check.
▷
In addition, switch on all other devices that you want to use in the op-
erating environment.
▷
Select the device in the Control Cockpit.
▷
Open the RF settings tab.
►
▷
Select the desired channel under Walk test and click Start.
►
▷
Walk the operating environment with the transmitter.
The display of the radio signal level is continuously updated.
Performing a walk test (reception quality)
140