Display Brightness
•
Level: Slider for adjusting the display brightness.
Mute Mode
•
Active: The
MUTE
switch of the paired transmitter is activated and can
be used.
•
Deactivated: The
MUTE
and cannot be used.
•
Push to
talk: Press and hold the
to activate the audio signal (for SL Boundary 114-S DW and SL Table-
stand 133/153-S DW only).
•
Push to
mute: Press and hold the
to mute the audio signal (for SL Boundary 114-S DW and SL Tablestand
133/153-S DW only).
Auto Lock
•
On: The automatic lock mode is activated. If no button is actuated on the
receiver for approx. 10 seconds, the lock mode is automatically activat-
ed.
• Long-press the jog dial to temporarily deactivate the lock mode.
•
Off: The automatic lock mode is deactivated.
RF Power
•
Automatic: The transmission power is automatically adjusted.
•
Level 1 ...
5: The transmission power can be manually reduced in 5 steps.
This function is required for operation in Multi-Room Mode.
Walk Test
•
Starts the walk test. See „Performing a walk test (reception quality)"
Factory Reset
•
Yes: All settings are reset to the factory defaults.
•
No: The settings are retained.
System Info
•
Displays the serial number and the current firmware version of the re-
ceiver.
switch of the paired transmitter is deactivated
MUTE
switch of the paired transmitter
MUTE
switch of the paired transmitter
SL Rack Receiver DW
75