Table of Contents
Advertisement
Mounting the jointing plate and fastening the mounting angles (to install
two receivers side by side)
To fasten the mounting angles:
▷
Unscrew and remove the two recessed head screws on the outward-
facing sides of the receiver.
Secure the mounting angles to the outward-facing sides of the receiver
▷
using the previously removed recessed head screws.
To mount the jointing plate:
▷
Place the two receivers side by side upside-down onto a flat surface.
Secure the jointing plate to the receiver using the six recessed head
▷
screws as shown.
►
Connecting the AWM 2 / AWM 4 remote antenna to the receiver
Instead of the supplied rod antennas, you can also connect a remote anten-
na to the receiver. For more information, see „The AWM 2 antenna wall
mount" and „The AWM 4 antenna wall mount".
Pay attention to the notes about antenna installation under „Recom-
▷
mendations on antenna mounting".
SL Rack Receiver DW
68
Advertisement
Table of Contents
