Sennheiser SpeechLine Digital Wireless Series System Documentation page 80

Product overview and operating elements
Front
1
1
Status LEDs
• See „Meaning of the status LEDs"
2
Analog Out 3-pin socket
• Analog audio output (see „Connecting the receiver")
• Suitable for Phoenix Contact MCVW 1.5-3-ST-3.81
3
Reset button
• To restore the factory settings
• Hold for 5 seconds
4
Dante I / PoE / Ctrl RJ-45 socket
• Digital audio output (see „Connecting the receiver")
• PoE supply (Power over Ethernet) (see „Putting the receiver into op-
eration")
• Configuration via the Sennheiser Control Cockpit or a media control
system (see „Controlling and monitoring the receiver via the net-
work")
5
Dante II RJ-45 socket
• Digital audio output (see „Connecting the receiver")
Back
5 4
2 3
SL MCR DW
79