Variante: SL MCR 4 DW (4 Kanäle)
Meaning of the status LEDs
The four LEDs display status information for the device as a whole or for
one of the two or four microphone channels.
Kanal 4
Kanal 3
Kanal 2
Kanal 1
When the LEDs are displaying the status of the entire device and not the
individual channels, all four LEDs (SL MCR 4 DW variant) or the first two
LEDs (SL MCR 2 DW variant) will light up or flash.
The LEDs for each individual channel display status messages for the cor-
responding radio connection.
Also note the additional information in the Control Cockpit.
All LEDs are green
After the power supply is switched on:
▷
The device is starting (approx. 20 seconds). Afterwards the status in-
formation is displayed.
All four LEDs light up green during startup even with the two-channel
variant SL MCR 2 DW.
▷
During operation:
A radio link to the transmitters has been established for all channels.
All LEDs are flashing green
▷
The
Identify
Cockpit.
All LEDs are yellow
All received transmitters have been muted with the
▷
All LEDs are flashing yellow
▷
The device is performing a firmware update.
See „Updating the firmware".
Variante: SL MCR 2 DW (2 Kanäle)
function for the entire device was initiated in the Control
SL MCR DW
keine Funktion
keine Funktion
Kanal 2
Kanal 1
MUTE
switch.
91