Starting up and using the boundary microphone
Removing/inserting the BA 40 accupack
The included BA 40 accupack is used to power the boundary microphone.
The accupack must be charged before the first use. The accupack can ei-
ther be charged with the optional CHG 2W charging base (see „The CHG
2W charging base") or with the supplied USB cable.
To remove the accupack:
►
▷
Pull the unlock button away from the accupack and pull the accupack
out of the compartment.
To insert the accupack:
►
▷
Slide the accupack into the compartment with the correct orientation
until the unlock button locks into place.
The charge level LEDs light up briefly and indicate the charge level.
The SL Boundary 114-S DW
130