Sennheiser SpeechLine Digital Wireless Series System Documentation page 42

Table of Contents

SL PASC 4

SL RACK RECEIVER DW ANTENNA I

SL RACK RECEIVER DW ANTENNA II

ANT I

SL Rack Receiver DW

Cables for connecting the SL PASC 4 to the SL Rack Receiver DW are supplied with the SL PASC 4.

Combining up to 8 links using the AWM 4 and two SL PASC 4 units

The following illustration shows an example of how to combine up to 8 links

with one AWM 4 antenna wall mount. This reduces the number of antenna

cables required from 16 to 4.

►

AWM 4

Link I

Link II

ANT II

▷

Please observe the information below on the length of the extension ca-

bles („Signal loss due to extension cables and antenna splitters").

Always combine all antenna sockets ANT I of up to four receivers

and all antenna sockets ANT II of up to four receivers respectively

to the two sockets of one link of the AWM 4. If you are not using all

connections on the antenna splitter, you should close the unused connec-

tions with a terminating resistor (50 Ω) to minimize interfering signals and

maximize transmission power.

Recommendations on antenna mounting

Use the following Sennheiser cables for

connecting the AWM 4 to the SL PASC 4:

CL 1 PP (1 m / 3.3 ft)

art. no. 507425

CL 5 PP (5 m / 16.4 ft)

art. no. 507426

CL 10 PP (10 m / 32.8 ft)