Table of Contents
Advertisement
Installing the receiver in a rack
To install the receiver in a rack:
Use the two supplied recessed head screws to secure the blanking
▷
plate from the GA 4 mounting kit to the mounting angle of the receiver
as shown.
Make sure to use the correct side (the one with the round holes) of the
blanking plate to secure it to the mounting angle.
►
▷
Only insert the two small covering caps into the antenna holes if you do
not wish to install the rod antennas at the front of the rack.
▷
Slide the receiver with the attached mounting accessories into a 19"
rack.
SL Rack Receiver DW
66
Advertisement
Table of Contents
