Table of Contents
Advertisement
GA 4 mounting kit
You need the GA 4 mounting kit to install the receiver in a rack. The GA 4
mounting kit is available separately as an accessory and is also supplied
with the following sets:
•
SL Handheld-Set R
•
SL Headmic-Set R
•
SL Lavalier-Set R
The GA 4 mounting kit consists of:
►
Fastening the mounting angles (to install a receiver)
To fasten the mounting angles:
▷
Unscrew and remove the two recessed head screws on each side of the
receiver.
▷
Secure the mounting angles to the sides of the receiver using the pre-
viously removed recessed head screws.
Make sure that the angled ends of the mounting angles point forward.
►
SL Rack Receiver DW
65
Advertisement
Table of Contents
