Table of Contents
Advertisement
AWM 2
CL 5 (5 m / 16.4 ft)
CL 10 (10 m / 32.8 ft)
CL 20 (20 m / 65.6 ft)
SL Rack Receiver DW
Option 1: Connecting the AWM 2 or AWM 4 antenna
wall mount directly to the receiver(s)
You can connect one receiver directly to one AWM 2 antenna wall mount
or you can connect two receivers directly to one AWM 4 antenna wall
mount.
►
CL 1 PP (1 m / 3.3 ft)
CL 5 PP (5 m / 16.4 ft)
CL 10 PP (10 m / 32.8 ft)
CL 20 PP (20 m / 65.6 ft)
Link I - Ant II
SL Rack Receiver DW
•
For the AWM 2, you can use Sennheiser extension cables CL 5/10/20.
•
For the AWM 4, you can use Sennheiser extension cables CL 1/5/10/20
PP.
Observe the following information when using extension cables:
Signal loss due to extension cables
In this scenario, using extension cables for remote antenna mounting re-
sults in a loss of transmission power, depending on the cable length.
You can compensate this signal loss by configuring the transmission pow-
er of the receiver accordingly.
▷
Observe the following minimum transmission power settings (SL Rack
Receiver DW: System Settings menu -> RF Power) for the respective
cable lengths:
•
Cable length of
5 m
•
Cable length of
10 m
•
Cable length of
20 m
•
Cable length of
25 m
Recommendations on antenna mounting
AWM 4
Link I - Ant I
-> at least
level 1
-> selected level +1, at least
-> selected level +1, at least
and longer -> selected level +2, at least
Link II - Ant II
Link II - Ant I
SL Rack Receiver DW
level 2
level 3
level 4
36
Advertisement
Table of Contents
