Table of Contents
Advertisement
Mounting the jointing plate and fastening the mounting angles (to install
two antenna splitters side by side)
To fasten the mounting angles:
▷
Remove the two recessed head screws on both outer-facing sides of
the antenna splitters.
▷
Fasten the mounting angles to the outer-facing sides of the antenna
splitters using the previously removed recessed head screws.
To mount the jointing plate:
Place the two antenna splitters side by side on a flat surface with the
▷
undersides facing upward.
▷
Screw the two antenna splitters together using the jointing plate and
the six recessed head screws, as shown in the figure.
►
▷
Screw the unit consisting of the two antenna splitters into a 19" rack.
The SL PASC 4 passive antenna splitter/combiner
187
Advertisement
Table of Contents
