Table of Contents
Advertisement
NO LINK: If the radio link breaks down completely, the background of the
display panel changes back and forth between light and dark and No Link
appears on the display panel.
Press the
ESC
button on the receiver to end the walk test.
▷
If the result of the walk test is not satisfying, you can take the following re-
medial measures:
•
If possible, reposition the receivers so that there is always a direct line
of sight between the receiver antennas and the paired transmitter.
•
If possible, remove obstacles between the transmitter and the receiving
antennas.
•
When rack mounting receivers, you should mount their rod antennas to
the front of the rack using the GA 4 rack-mount kit.
•
If you have manually adjusted the transmission power, you may have to
readjust it via the receiver's operating menu: System Settings -> RF
Power. You can find more information under „Multi-room mode".
Performing a walk test (reception quality)
143
Advertisement
Table of Contents
