Table of Contents
Advertisement
Integrating the receiver into a network without DHCP using Fixed IP
If there is no DHCP server in the network and you are working with fixed IP
addresses, please observe the following information.
▷
Set the Mode to Fixed in the receiver's Network Settings menu.
Manually enter an IP address in the IP option in the receiver's Network
▷
Settings menu.
To add the receiver in the Sennheiser Control Cockpit:
Use the Add Device function in the Sennheiser Control Cockpit and
▷
enter the IP address you selected.
Or:
Activate the mDNS function in the receiver's Network Settings menu
▷
(factory setting: deactivated).
Restart the receiver.
▷
Once restarted, the receiver is automatically detected in the Sennhe-
iser Control Cockpit.
mDNS = multicast Domain Name System: resolves host names to
IP addresses within small networks that do not include a local name
server. Used for automatic device discovery.
Updating the firmware
The firmware of the receiver is updated using the Sennheiser Control
Cockpit software.
You can find more information about this procedure in the software help
within the software itself or from the Sennheiser Documentation app or
the download area of the Sennheiser website.
The Sennheiser Control Cockpit software help
SL Rack Receiver DW
61
Advertisement
Table of Contents
