Interfaces; Overview; X1 Power Supply - Siemens SINUMERIK 828D Manual

Note
The type plate and the MAC address label are on the rear side of the mounting plate. It is
advisable to make a note of relevant data as it is no longer visible after installation.
11.4.2

Interfaces

11.4.2.1

Overview

Interface overview
PP 72/48D PN I/O module interfaces
Table 11- 37 PP 72/48D PN I/O module interfaces
Interface
Power supply connection
PLC I/O Interface
PLC I/O Interface address
Digital input/outputs 1
Digital input/outputs 2
Digital input/outputs 3
11.4.2.2

X1 power supply

Features and use
A description of the interfaces for the external power supply X1 can be found in the chapters
titled "Interfaces" and "Connection" in the PPU description.
On the module side, the power supplies are protected against:
● Polarity reversal
● Short-circuit (elec. current limitation of the outputs)
● Overload (self-restoring PTC fuse - Multifuse)
Power requirement
0.7 A (at 24 V DC) for PP 72/48D PN and digital inputs plus 3 x 4 A at X111, X222 and X333
for supplying digital outputs.
PPU
Manual, 06/2009, 6FC5397-2DP10-0BA0
Designation
X1
X2 (ports 1 and 2)
S1
X111
X222
X333
Spare parts/accessories
11.4 PP 72/48D PN
Type
Screw-terminal block
Socket
DIP switch
Ribbon cable connector
Ribbon cable connector
Ribbon cable connector
125