11.4
PP 72/48D PN
11.4.1
Description
Features
The I/O module is a simple module (without a separate enclosure) for connecting digital and
analog input/outputs as part of an automation system based on PROFINET IO.
Note
Communication network for the SINUMERIK 828D automation system:
PLC I/O Interface based on PROFINET IO, see System overview (Page 11).
The module has the following important features:
● 72 digital inputs and 48 digital outputs
● PLC I/O Interface connection (max. 100 MBaud)
● On-board status display via 2 diagnostic LEDs
● The 3 plug-in connectors for the digital inputs and outputs are 50-pin terminal posts for
● Terminal strip converters can be used, or the direct connection of distribution boards, for
● Analog signal cables can be connected directly to screw contacts on the module.
An external power supply unit (24 V DC) is required to supply the module and the digital
outputs.
PPU
Manual, 06/2009, 6FC5397-2DP10-0BA0
connecting ribbon cables.
example, is possible.
Spare parts/accessories
11.4 PP 72/48D PN
123