Technical Data; Description - Siemens SINUMERIK 828D Manual

11.4.6

Technical data

Table 11- 45 Technical data of the I/O module
Safety
Degree of protection
Protection class
Approvals
Power consumption at rated load (without digital outputs)
PP 72/48D PN
Mechanical data
Dimensions (WxHxD)
Weight, approx.
Climatic environmental conditions
Cooling
Temperature limits
Limits for relative humidity
At 25 ℃
Condensation
Air pressure
Derating
Shock stress during transportation
Free fall
11.5 NX10
11.5.1

Description

Properties
Using this module, you can expand the performance of an axis grouping of the
SINUMERIK 828D CNC automation system. With an NX10 Numeric Control Extension, the
PPU is able to control up to 8 axes.
The NX10 has the following interfaces:
● 4 DRIVE-CLiQ (X100 – X103)
● 4 digital inputs and 4 digital inputs/outputs (X122)
● Power supply (X124)
PPU
Manual, 06/2009, 6FC5397-2DP10-0BA0
IP 00 according to EN 60529
III; DVC A, (PELV) acc. to EN 61800-5-1
cULus, CE
17 W
(150 x 300 x 35) mm
0.9 kg
Open-circuit ventilation
Operation
0 ... 55 °C
5 ... 90 %
Without condensation
Not permissible
106 to 92 kPa or 0 to 1000 m above sea level
At altitudes over 1,000 to 4,000 m above sea level, the upper
temperature limit must be reduced by 3.5°C / 500 m.
≤ 1 m (in transport packaging)
Spare parts/accessories
11.5 NX10
Storage/transport
-40 ... 70 °C
5 ... 95 %
Without condensation
137