Operator Controls And Display Elements; Front Side - Siemens SINUMERIK 828D Manual

Spare parts/accessories
11.1 MCP 483C PN
Expansion slots
2 slots for control devices (d = 16 mm).
(additional cable set required for control devices, see section: "Accessories")
Key type
Mechanical short-stroke keys.
11.1.2

Operator controls and display elements

11.1.2.1

Front side

Overview
① Emergency stop latching pushbutton
② Installation locations for control devices (d = 16 mm)
③ Reset button
④ Program control
⑤ Operating modes, machine functions
⑥ User keys T1 to T15
⑦ Direction keys with rapid traverse override (R1 to R15)
⑧ Spindle control with override switch
⑨ Feed control with override switch
⑩ Keyswitch (four positions)
Figure 11-1 Position of control elements on MCP 483C PN
78
Manual, 06/2009, 6FC5397-2DP10-0BA0
PPU