Siemens SINUMERIK 828D Manual page 139

Type plate
The NX10 module type plate contains the following basic information:
Figure 11-34 NX10 type plate
Note
You might need to access the information provided on the side-mounted type plate after the
equipment has been mounted. Since the type plate is located on the right-hand side of the
housing, which is the side typically used to connect to the SINAMICS S120 module, we
recommend that you make a note of the serial number of the NX10 prior to assembly.
PPU
Manual, 06/2009, 6FC5397-2DP10-0BA0
Spare parts/accessories
11.5 NX10
139