Table of Contents
Advertisement
Connecting
8.7 Use of Ethernet interfaces
Component
HLA
S120M
Additional information
Additional information about Line, Motor and Power Modules is provided in:
• Booksize Power Units Equipment Manual
• Chassis Power Units Equipment Manual
• AC DRIVE Equipment Manual
• HLA System Manual
• S120M Equipment Manual
Additional information about the Combi is provided in:
• SINAMICS S120 Combi Equipment Manual
Additional information about HF Motor Modules and the associated components is available in:
• High Frequency Drive System Manual
You can find additional information on all of the other modules in:
• Control Units and Additional System Components Equipment Manual
8.7
Use of Ethernet interfaces
Application
The following connections can be established via the Ethernet interfaces:
• X120 provides the link to the system network (e.g. operator panels).
• X130 connects the NCU to the company network.
• X127 is used for commissioning and remote diagnostics via teleservice adapter IE.
You can find further details in the following manuals:
– SINUMERIK ONE Commissioning Manual Basic Software and Operating Software
– SIMATIC TS Adapter IE Manual
Properties
The interfaces are full duplex 10/100/1000 Mbit Ethernet ports. The ports are connected as an
Ethernet end device.
70
Description
Controls (open-loop and closed-loop) electrohydraulic control valves in
hydraulic linear axes in conjunction with SINUMERIK ONE
This is the distributed version of the modular SINAMICS S120 drive sys‐
tem.
Equipment Manual, 01/2022, A5E45627807B AE
NCU 1750
Advertisement
Table of Contents
