Siemens SINUMERIK 828D Manual page 98

Spare parts/accessories
11.2 MCP 310C PN
Mounting slots for control devices
Do not chip out the openings for mounting control devices ⑥ (risk of damage), but drill
them to the required width.
Key caps
All keys of the MCP 310C PN come with changeable key caps.
Refer to the following table for the additional replacement key caps provided for turning
machines in the accessories pack.
Key cap
You will find the order numbers for the key caps in section: "Accessories".
98
WARNING
Symbol number
7027
7125
7126
7127
7128
Key cap Symbol number
7129
7130
7131
7132
Manual, 06/2009, 6FC5397-2DP10-0BA0
PPU