Valve Removal - Cornelius Flavorfusion TP01070 Training Manual

V R
ALVE EMOVAL
1. Pull on retaining bracket (both sides) so the switch panel will rotate out of the way (see FIGURE 9).
FIGURE 8
2. Unscrew the switch panel (one on each side).
FIGURE 10
3. Place the tabs into the slot over the merchandiser lights.
FIGURE 12
4. Place the valve removal tool on the back
block release latch, keep the handle flat.
© 2004-2007, IMI Cornelius Inc.
FlavorFusion®/FlavorOverload Training Manual
Retaining
Bracket
- 7 -
FIGURE 9
FIGURE 11
FIGURE 13
Valve Removal Tool
FIGURE 14
Publication Number: TP01070