4. Install the breather hose 1 to the battery 2 .
5. Install the battery in the battery box.
NOTE:
Make sure the main switch is turned off.
6. Connect the possitive cable 3 first, and then
the negative cable 4 to the battery as
shown.
CAUTION:
D Avoid touching wrenches to the ground
of the insulator plate on the muffler when
tightening
terminal
wrench with tape.)
D Never hammer the battery terminals when
connecting the cable terminals to the bat-
tery.
D Make sure battery leads are connected
properly.
Reversing the leads can seriously dam-
age the electrical system.
3-14
nuts.
(insulate