Yamaha VK540EF Assembly Manual page 36

Set up point
1. Joint the front bumper 1 & 2 using the
spacer 8 joint 7 and bolts
2. Fit the front protector 4 to the front bumper
using the plate 9 and rivets
3. Install the bracket
bolt on both sides.
12
NOTE:
Temporarily tighten bolt
Be sure to install the bracket
to downward.
4. Install the front bumper assembly to the
frame using the hexagon bolts
14 and nuts 15
NOTE:
Temporarily tighten bolts
Part of B does not equipped at right side.
5. Tighten the bolts
2-12
.
12
.
17
10 to the frame using the
12 .
welding face A
10
, washers
13
.
.
13
and .
12 13