Replacing The Server In The Rack - Avaya S8730 Maintaining Manual

Server preparation and reinstallation
3. Use the Torx screwdriver to tighten the security screw on the cover latch.
4. Replace the Torx screwdriver in its clip on the rear panel of the server.

Replacing the server in the rack

1. Align the server on the rails and push the server into the rack until it is flush with the
2. Close both quick-release levers on the front of the server to secure the server in the
3. Reattach all cable connections to the back panel of the server.
18 Maintaining the Avaya S8730 Server for Modular Messaging
rack.
rack.
June 2009