Replacing A Duplicate Power Supply - Avaya S8730 Maintaining Manual

7. Restore power to the server.
8. Verify that the power supply LED is green.
9. Verify that the front panel external health LED is green.
Related topics:
Shutting down the MAS
Shutting down the MSS
Restoring power to the server

Replacing a duplicate power supply

It is not necessary to power down the server to replace a power supply in a server with a
duplicate power supply.
Warning:
To reduce the risk of personal injury from hot surfaces, allow the power supply to cool before
touching it.
Caution:
To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
1. Remove the power cord from the defective power supply.
2. Press the release tab on the power supply with your thumb.
Maintaining the Avaya S8730 Server for Modular Messaging
on page 14
on page 15
on page 19
Replacing a duplicate power supply
June 2009 51