Avaya S8730 Maintaining Manual page 33

5. If the MAS has a single port board, attach the CT bus cable to that board so that
Maintaining the Avaya S8730 Server for Modular Messaging
a. Attach the middle connector on the CT bus cable to the CT bus edge connector
at the top of the board located in slot 4 (middle slot).
b. Attach the beginning connector to the CT bus edge connector of the second
board.
c. Attach the end connector to the CT bus edge connector of the third board.
it will be available if a board is added later.
Installing the board
June 2009 33