Replacing The Pci Riser Cage - Avaya S8730 Maintaining Manual
For modular messaging
Hide thumbs
Also See for S8730:
- Installing (36 pages) ,
- Installing and configuring (104 pages) ,
- Quick start manual (36 pages)
Table of Contents
Advertisement
Adding and replacing an MAS port board
Replacing the PCI riser cage
1. Align the two tabs of the riser cage with the guides on the server chassis and slide
2. Tighten the thumbscrews with the Torx screwdriver.
34
Maintaining the Avaya S8730 Server for Modular Messaging
the riser cage in the slots until it rests on the base of the chassis and is aligned with
the two thumbscrew holes.
June 2009
Advertisement
Table of Contents
