Adding and replacing an MAS port board
Removing a port board
1. In the PCI cage, locate the port board you are removing.
2. Remove any interior cables connected to the port board, such as the CT bus cable.
3. Remove the screw that secures the port board in its slot by turning the screw
4. While holding the PCI cage steady with one hand, pull the port board directly out of
5. Cycle power on the MAS to clear out the settings for the board that was removed.
26
Maintaining the Avaya S8730 Server for Modular Messaging
counterclockwise.
the cage.
a. Leaving the cover off the server, plug in the cables for the monitor, keyboard,
and mouse.
b. Plug in the AC power cord and let the server boot completely.
June 2009