Advertisement
AVAYA E1/QSIG
Version S
4/12/07
Version T
5/21/07
Version U
6/1/07
Version V
10/29/07
Version W
3/08
Version X
05/05/08
Version Y
05/16/08
Version Z
06/11/08
Version AA
07/28/08
Version AB
11/14/08
Version AC
2/02/09
Version AD
02/12/09
Version AE
03/18/09
Version AF
04/08/09
Version AG
07/09
Version AH
07/20/09
©2009 AVAYA Inc. All rights reserved. All trademarks identified by the ®, SM and TM are registered trademarks,
servicemarks or trademarks respectively. All other trademarks are properties of their respective owners. The above information
is based on knowledge available at the time of publication and is subject to change without notice. Printed in U.S.A.
AVAYA
Inc.
1033 McCarthy Blvd.
Milpitas, CA 95035
(408) 577- 7000
http://www.avaya.com
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
TSC, CA-TSC, and Trunk Group for NCA-TSC
Section 6.0 - Changed information clarifying what origin number
entry should be on outgoing tab for PBX Type
Added sidebar about CCRON needing to be turned on in
system-parameters customer-options screen in addition to the
one already placed adjacent the display system-parameters
coverage-forwarding screen.
Added new screens for Avaya CM 4.0 and related private-
numbering format; updated sidebars; changed Dial Access
parameter in trunk group screen to N.
Updated Consideration 8.12
Updated info for station form
Updated Consideration 8.12; Updated Title to S87x0 / 8x00
Updated to support MM 4.0
Removed Dialogic Driver release from Section 2.0
Updated sidebar note in Section 5.0 detailing administration of
trunk group and to leave out highest order timeslot/port.
Added Consideration 8.14
Added note about setting "Per Station CPN – Send Calling
Number?" on Station Form to Yes in Section 5.0
Updated to support MM 5.0; Limit Requests for MWI changed in
Section 6.0; Added note about reviewing/changing
beginning of Section 6.0; Added Consideration 8.15
Changed screen shot for VMSC and added sidebar in Section 6.0.
Added Consideration 8.16 regarding Re-Route Request
Added Consideration 8.17 regarding potential issues that may arise
when using MM Caller Applications and Vectors
Updated to support MM 5.1; changed wording in note on sidebar
for VMSC in Section 6.0; Added note regarding collocated
PBX/MM on page 1
Updated Consideration 8.12 to reflect calling party number/name
display on ringing phone and PBX requirements needed
41
qte.prm
file at
Advertisement
