Advertisement
Support NOTE
for MM 1.1 & 2.0 only:
• Limit Requests should be
checked.
• Maximum Requests per
Minute should be set for 200.
AVAYA E1/QSIG
Next access the Message Waiting Indicator (MWI) tab
1. Enable Message Waiting Indicator (MWI) = Enable by checking
the box
2. MAS MWI Server = Enter the name of the MWI server created
during the installation procedure.
3.
Scheduled MWI updates: Active or Inactive = Configure as per
customer requirements.*
4. Limit requests = Leave Unchecked
5. Maximum requests per Minute = <grayed out>
6. Message Application Servers that Support MWI = This box
should contain a list of MAS servers capable of placing MWI
requests.
7. Select OK to save changes
*Note: The Scheduled MWI updates parameter is only available on MM 3.x
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
21
Advertisement
