Advertisement
AVAYA E1/QSIG
Incoming Trunk group: should be configured containing all of the required
incoming ports from each MAS in your environment, the ports should be entered
into the trunk group so Trunk group port-1 is the first port on MAS1, Trunk group
port-2 is the first port on MAS2, Trunk group port-3 is the second port on MAS1,
etc..
Outgoing Trunk group: should be configured with all of the required outgoing
ports from each MAS in your environment, used for MM client outcalls and TUI
transfers.'
Refer to Consideration 8.10 for additional N+1 programming.
Change the ISDN Numbering - Private Network form to configure and ensure
the PBX for the proper Network Level to be used. Below is a copy of the ISDN
Numbering - Private Network form with the required field in boldface.
display isdn private-numbering
Network Level: 0
Level 2 Code:
Level 1 Code:
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
ISDN NUMBERING - PRIVATE FORMAT
PBX Identifier:
Deleted Digits: 0
10
Advertisement
