Advertisement
NOTES for Avaya CM 4.0 and later
Network Levels and Level codes are now
found in system-parameters features under
Parameters for Creating QSIG Selection
Numbers
Note: If the numbering format is set to unk-
pvt then the PBX looks to the Private-
Numbering Table to build the number.
Network Level must not be left blank (in
most cases this is set to 0) or NO number
will be sent. This is where the PBX builds
the proper number (i.e., user's station
number) for the integration to open the
proper mailbox.
IMPORTANT
This screen supports Private Numbering
Plans (PNP) allowing you to specify the
digits to be put in the Calling Number
information element (IE), the Connected
Number IE, and the QSIG Party Number
for extensions in the Private Numbering
Plan.
Avaya CM supports private-network
numbers up to 15 digits in length. If the
total number — including the level 1 and
2 prefixes, the Private Prefix (formerly
known as PBX identifier), and the
extension — is more than 15 digits long,
neither QSIG Party Numbers nor the
information elements are created or sent.
AVAYA E1/QSIG
display system-parameters features
ISDN PARAMETERS
Send Non-ISDN Trunk Group Name as Connected Name? n
Display Connected Name/Number for ISDN DCS Calls? y
Send ISDN Trunk Group Name on Tandem Calls? n
Send Custom Messages Through QSIG? y
MWI - Number of Digits Per Voice Mail Subscriber: 4
Unknown Numbers Considered Internal for AUDIX? n
USNI Calling Name for Outgoing Calls? y
Path Replacement with Measurements? y
QSIG Path Replacement Extension: 2798
Path Replace While in Queue/Vectoring? n
NOTE: This parameter must match the number of digits used for mailbox/extension length.
For multiple length extensions leave this field blank (this requires Avaya CM 2.1
or later). However, please note MM supports only one mailbox length.
In Avaya CM 4.0 the Private Numbering Form is now used to define the number
format for specific trunk groups. In our example screen below, we have a 4-digit
extension length that includes extensions from 2000 thru 5999. The 4-digit
number will be part of the QSIG number information that will be passed to the
MM for call integration.
If you set numbering format to "unk-pvt" on page 2 of the trunk group form (see
earlier in this section), which is for the MM Trunk Group, this form must be
completed so the CM knows how to build the private format number. For that
reason, do not leave the form blank or the MM call integration will fail.
change private-numbering 3
Ext Ext
Trk
Len Code
Grp(s)
4
2
99
4
3
99
4
4
99
4
5
99
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
FEATURE-RELATED SYSTEM PARAMETERS
QSIG/ETSI TSC Extension: 2998
Feature Plus Ext:
National CPN Prefix:
International CPN Prefix:
Pass Prefixed CPN to ASAI? n
NUMBERING - PRIVATE FORMAT
Private
Prefix
11
Page
8 of
PARAMETERS FOR CREATING
QSIG SELECTION NUMBERS
Network Level: 0
Level 2 Code:
Level 1 Code:
(see note below)
Page
1 of
Total
Len
4
Tot
al Administered: 4
4
Maximum Entries: 540
4
4
17
2
Advertisement
