Download Print this page

Avaya S87 0 Series Configuration Note page 28

Emea

Advertisement

AVAYA E1/QSIG
the MAS. The following conditions will result in the PBX requesting
message waiting indicators status:
-
Switch reload. 15 minutes after a switch reload, a message
waiting interrogation request will be sent to the MAS.
-
Interruption of service on a QSIG link. 15 minutes after
service is re-established on the QSIG link, a message waiting
interrogation request is sent to the MAS.
-
Scheduled daily maintenance routine. Once daily, during the
scheduled maintenance period (usually around 1:00 A.M. on most
switches), a message waiting interrogation request is sent to the
MAS.
8.6
MAS can support multiple Avaya PBX's in a "centralized" voice
mail arrangement only if all PBX's are connected using QSIG. If
Avaya G3/MultiVantage PBX's uses DCS for networking, QSIG
integration cannot provide full functionality to remote PBX
subscribers. Please refer to Section 9.0 to support a centralized
environment using DCS+.
When running MWI on your Voice Server you should setup a
separate trunk group containing 2channels from one of your QSIG
trunks, these channels should not be apart of any other trunk group.
You should then create a new MWI port group containing these
channels and make the relevant changes in MAS VMCS.
8.7
Support for Transfer to QSIG Voice Mail feature. In order to
provide support for the Transfer to QSIG Voice Mail feature on your
QSIG integrated MAS solution, you need to ensure the following
criteria are met:
Your switch will need to be running Definity software R8 or later.
1. You will need to have the following features enabled on your switch:
2. A Feature Access code for Transfer to QSIG Voice Mail, will need to be
3. Your MAS Voice Server will need to be using the QSIG-MWI hunt group
Example on how the feature works:
Extension 7001 has voice mail but calls received are forwarded to
extension 7002 rather than directly to voice mail.
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
• ISDN-PRI or ISDN-BRI
• QSIG Supplementary Services
• Transfer to QSIG Voice Mail
configured.
integration as described in this document.
28

Advertisement

loading

This manual is also suitable for:

S8 0 seriesDefinity g3Prologix