IBM 3745 Series Service Functions page 246

Return Codes
Table 10-1 (Page 2 of 2). Return Codes
CC
Explanation
07 Invalid CA state: CA found Interface enabled
08
Invalid CA state: L 1/L3 CA enable failure
09 CA IS In either ASC or CSCG, but not both
OA CA IS not operative
OB Power block failure detected by L 1
OC
IOHF, threshold reached at L 1
00 ASCF detected by L 1
CA CHAIN UPDATE (SHT or RES Command)
00
CA chain update complete
02 CA not attached
03 CA not Installed
04 Function al ready performed
05 CA not CACM mode disconnected
06 CA cannot be Inserted Into ASC
07 CA cannot be bypassed from ASC
08 CA cannot be Inserted Into CSCG
09 CA cannot be bypassed from CSCG
OA CA IS not operative
OB IOHF, threshold reached at L 1, perform selective POR
OC IOHF, threshold reached at L1, CA In ASC or CSCG
00 Power block failure detected by L 1
INSTALL CA
00 Set/reset complete
02 CA not attached
03
CA currently Installed
04
Function already performed
Chapter 10. CA Services
10-15