IBM 3745 Series Service Functions page 190

CDF Verify
CDF Create/Upgrade/Verify Field Explanations
CDF zzzzzzz STARTED
vvvv
INSTAllED POWER SUPPLIES ARE
vvvv
'·IOSS HJFORI·IATION: FETCHED
CCU INFORMATION: yyyyyyy ON CCU
x x
SHITCH INFORMATION : yyyyyyy ON S\~ x x
CA INFORMATION: yyyyyyy ON CA
xx xx xx xx xx xx xx xx xx xx xx
SCAlmER Hil : COI·1PlETED
xx xx xx xx xx
lA HIFORI·IA TI ON : yyyyyyy OI' J lA
xx xx xx xx xx xx xx xx xx xx xx
COF VERIFY COMPLETED
xx xx
===>
Fl:END
F3:AlARJ·'
F6:QUIT
Figure 9-11. CDF Display/Upgrade/Verify Completion Screen
vvvv
Can be ALL POWER SUPPLIES ARE UP or SOME POWER SUPPLIES ARE
NOT UP
yyyyyy FETCHED or ERROR.
zzzzzz
CREATE, UPGRADE, or VERIFY.
CA
or
LA
xx
xx represents the CA or LA number.
CCU
or
SW
x
x represents the CCU or SWITCH A or B.
COMPLETED The sensing step for scanner IML is terminated and no error
has been found, or the function is terminated with or without
error.
FETCHED
ERROR
xxxxx
The sensing step is terminated and no error has been found.
An error has been found during the sensing step. Check
through the display/update function.
Result of the operation:
COMPLETED The operation has been performed. However you
may receive the message COMPLETED t~ITH ERROR if
a sensing error has been detected that does not
prevent the completion of the operation.
ABORTED An error has been found while sensing the CCU
information. Check through the display/update
function, then re-IML the MOSS.
Chapter 9. Configuration Data File (CDF)
9-11