MOSS Screen
MOSS Console Screen Layout
CUSTOMER ID
MACHINE TYPE
SERIAL NUMBER
For information on the console and keyboard, refer to the documentation sup-
plied with the console.
CUSTO~ER
ID: xxxxxxxxxxxxx
CCU-A
RESET
3745-xlO
SERIAL
NU~BER:
nnnnnnn
2
3
~ISA
(I'lachine Status Area)
1
ines
2
to
7
4
CCU-B
5
RESET
6
---------------------------------------------------------------mm/dd/yy
hh:mm 7
FUNCTION ON SCREEN:
FUNCTION PENDING:
FUNCTION area (lines 8 to 21)
8
9
20
21
===> < ••••••••••••••••••••
t·IESSAGE area •....•.•.••......•.............
>
22
< •••••••••••••••••••••••••
ALARN area ...............•.••..•.••.......
>
23
F1:END F2:MENUI F3:ALARN
< ••••••
F KEY line
24
< ••••••••••••••••••••••
CONSOLE TERtHNAL INFORMTION ....•........•••..
>
25
Figure
1-7. 3745 Console Screen Main Areas
Customer identification, permanently displayed (16 characters). This informa-
tion is entered by the customer, using the
password management
function.
374S-xxx
where xxx indicates the model.
Machine serial number of the 3745 (7 characters). Permanently displayed.
This information is entered by manufacturing, or when formatting a new disk.
MACHINE STATUS AREA
Current status of the CCU{s) and scanners, token-ring/TIC or IPL progression.
FUNCTION ON SCREEN
When a function is displayed, the name of the function is written next to it.
FUNCTION PENDING
When a function is pending, its name is written next to it.
FUNCTION AREA
Function display and operator input. This area includes the different menus
(customer and FE/CE).
MESSAGE AREA
Operator control and function messages are displayed in that area.
ALARM AREA
The first alarm is displayed and the following ones are queued (up to five
F KEY LINE
alarms can be queued).
• When there is no alarm, the word
ALARM
does not appear.
• When there is more than one alarm, the word
ALARM
is blinking.
• Pressing
F3
displays the next alarm.
The alarms give the probable cause, the area of the error, and a reference
code that may lead to an FRU list. All alarms are listed in the 3745 Problem
Determination manual, SA33-0096.
Lists all the defined F keys (Only the available F keys are shown).
CONSOLE TERMINAL INFORMATION
Gives information on the communication between the console
and the MOSS.
Chapter 1. How to Use the MOSS Function Screens
1-7