IBM 3745 Series Service Functions page 115

TSS Messages
INVALID LINE ADDRESS
Cause:
The line address that you entered IS not within the range 0 to 1039.
Action: Check the line address and enter the proper one.
INVALID OPTION ENTERED
Cause: You selected checkpoint trace and the entered option IS not 'ON' or 'OFF'.
Action:
Enter the correct option.
INVALID SCANNER ADDRESS
Cause: The scanner address sent to the control program via a mailbox IS found invalid by the control program.
Action: Call the PE.
10C/SCANNER ERROR: FUNCTION NOT PERFORMED
Cause: A hardware error IS detected either
In
the scanner or
In
the IOC bus. The MOSS command cannot be performed. A BER
Type 01, I D
OS
IS created.
Action: Terminate the function.
LINE ADDRESS )()(}()( IS IN SELECTED SCANNER yy
Cause: You selected a scanner (yy) uSing a line number (xxxx).
Action:
None.
LINE ADDRESS DOES NOT BELONG TO AN INSTALLED SCANNER
Cause:
There IS no Installed scanner corresponding to the line address that you entered.
Action: Check the I me address and enter the proper one.
LINE NOT INSTALLED
Cause:
The selected scanner IS either not present or power OFF.
Action: Check CDF and power.
LOOK AT MSA FOR ADDRESS COMPARE STATUS
Cause: The address compare operation you speCified IS now set. The MSA displays the status of the operation.
Action: None.
NO ANSWER FROM CONTROL PROGRAM: FUNCTION NOT PERFORMED
Cause: You tried to connect a scanner to the control program and the control program did not send an answer.
Action: Check If the CCU was IPLed correctly.
NO DELAYED ALTER. SPECIFY IT IN A DISP/ALT FUNCTION
Cause: You forgot to speCify a delayed alter action dUring the address compare selection.
Action: Set the scanner action to 3.
NO DELAYED DISPLAY. SPECIFY IT IN A DISP/ALT FUNCTION
Cause:
You forgot to speCify a delayed display action dUring the address compare selection.
Action: Set the scanner action to 2.
NO SCANNER SELECTED
Cause: You tried to release a scanner but no scanner IS selected.
Action: None.
PRESS BREAK TO CANCEL ADDRESS COMPARE
Cause:
You speCified an address compare operation with the delayed display or alter action.
Action: Walt for a hit which cancels the current address compare, or press BREAK to force AC cancel.
REFRESH MODE: PRESS BREAK TO STOP REFRESH
Cause: You requested the refresh mode of the currently displayed data.
Action: Press BREAK to stop.
REQUEST IGNORED: CCU NOT INITIALIZED
Cause: You requested the TSS services and the CCU IS not Inttlallzed.
Action:
IPL the CCU.
SCANNER AC HIT BUT REQUESTED ACTION NOT PERFORMED
Cause: An address compare hit occurred for the operation that you speCified, but the requested action did not take place
because of scanner error. A BER Type 01, ID OS IS created.
Action:
Terminate the function.
SCANNER CANNOT BE CONNECTED: MOSS IS NOT ONLINE
Cause: Self explanatory.
Action:
Set MOSS online and re-IML the scanner.
4-26
3745 Communication Controller