General System Configuration; Module; Cautions On System Design - Mitsubishi MELSEC-A A6MD Operating Manual

2. SYSTEM CONFIGURATION
/MELSEC
2.
SYSTEM CONFIGURATION
2.1 General System Configuration
A73CPU system
Keyboard cable
Monitor
display cable
L 1
1 1
-~
Monitor display unit
pamq
The keyboard and monitor display cables are optional:
a) Keyboard cable : AC3OMD-K (3 rn (9.84 ft))
b) Monitor display cable
: AC3OMD-D (3 m (9.84 ft)j
Cables shorter or longer than 3 m should be prepared
by the user.
For details, see the AGMD Monitor Display User's Manual
Fig.
2.1 General System Configuration
2.2
Module
(1)
The AGMD is connected to the A70MDF in the A73CPU system.
2.3 Cautions on System Design
(1)
Use the two cables (for the keyboard and the monitor display) to
connect the AGMD
to
the A70MDF.
(2) Turn off the power to the AGMD and A70MDF before connecting
them.
I f the cables are connected or disconnected after the AGMD
and/or A70MDF is powered up, an A73CPU error, AGMD display
error, etc. will occur.
(3)
Set the A70MDF/AD57-S2 slide selection switch in the A70MDF
position.